![]() Checking the 2.5 Axis Feature Type will be a common procedure when working with these features! Open Pockets Make sure to select “Face Feature” as the type, and then define the plane to machine up to. Tip: If SolidWorks CAM doesn’t recognize your face feature, right click on “Mill Part Setup” and then choose the “2.5 Axis Feature” in the dropdown menu. It is commonly used to machine down the stock to the top-most planar face of the part itself. However, none of these posts did what I needed or outputted gcode that my grbl controller could work with.A face feature is a planar face that is parallel to the mill part setup. Please test before walking away from your machine. This is work in progress and might not work as you intend. While I don't use this method for normal operation, it's good to run test files to see GRBL's response. To test, I connect to my GRBL controller using UGS ( ). ctl file will be deposited in the C:\CAMWorksData\UPG-2\ctl\ folder. To compile, open in UPG-2 and hit compile. ![]() To edit, open in UPG-2 and/or EC Edit-2 (on Windows) To use, direct SolidWorks CAM or CAMWorks to the post processor in the Machine - Post Processor setup of the CAMWorks NC Manager. Specifically I'm using it on a RS-CNC32 ( ), similar to a Carbide 3D Shapeoko or OPENBUILDS WORKBEE. It is intended to be used with GRBL CNC Routers, but with modification it could be used with other GRBL controllers. ![]() This is developed using Universal Post Generator (UPG-2) utility available from A post processor for CAMWorks / SolidWorks CAM for GRBL ( )
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |